Configurations – Preventive Maintenance

OBJECTIVE

The Configurations – Preventive Maintenance allows the user to configure the functionality of the preventive maintenance.

 

STEPS

  maestro* > Equipment > Preventive Maintenance > Maintenance > Configurations

 

Enter the configurations

  1. In the Configurations window, enter the required information in the Equipment – Preventive Maintenance tab.

Field

Description

Use Only One Meter?

Check in order to use only one meter per equipment.

NOTE: If the box is not checked, maestro* will allow the user of a second meter. For example, the first meter is used to measure the kilometers and the second measures the hours.

Default Priority

Allows user to set a default priority, which will be used in the scheduled maintenance management.

NOTE: The priority must have already been created in the Equipment > Maintenance – Define Priority Codes.

Project Template

Allows the user to select a project template which will be used by default when creating a new project linked to equipment.

Always recalculate date of next maintenance based on percentage reached

Force the recalculation of the next maintenance date based on the percentage reached or the time elapsed since the last maintenance.

Default Work Order Type

Allows the user to select a default work order type that will be generated at the moment of the scheduled maintenance.

NOTE: If a work order type is selected, maestro* verifies to ensure the access to the "Maintenance and repairs / Brake and Tire" tab is activated for this type of work order.

  1. Complete the information in the Work Days section:

Field

Description

Work Days

When checked, these fields allow for the entry of work days which will be used in the calculation of the next maintenance to be performed on the equipment.

  1. Complete the information in the Meter Production Transactions section:

Field

Description

Default Activity

Allows the user to select a default activity used to generate the meter production transactions based on the meter variations.

Default Group

Allows the user to select a default group used to generate the meter production transactions based on the meter variations.

During the saving of meter transactions, if an activity and a group are shown in these fields, maestro* will automatically generate a meter production transaction corresponding to the difference between the current meter and the preceding meter for each equipment.

  1. Complete the information in the Minimum acceptable values for band measurement section:

Field

Description

Brakes

Enter the minimum accepted for the band measurement of the brakes.

Unit of Measure

Select the unit of measure, either Millimetres, Inches or %.

Front Tires

Enter the minimum accepted for the band measurement of the front tires.

Unit of Measure

Select the unit of measure, either Millimetres, Inches or %.

Rear Tires

Enter the minimum accepted for the band measurement of the rear tires.

  1. Complete the information in the Fuel Management section: 

Field

Description

Charge fuel expenses to the company that owns the equipment

When checked, this box allows to indicate that fuel expenses will be charged to the company who owns the piece of equipment.

NOTE: Applies to the multidimensional mode only.

  1. Click on Save.
  2. Click on Quit.

 

Last modification: December 20, 2024